/******************************************************************************
             Copyright (c) 1999 Unigraphics Solutions, Inc.
                       Unpublished - All Rights Reserved

*******************************************************************************/
/*

The following example requires a blank, open part. The code creates
two generator curves and then creates a trimmed tube.

*/

#include <uf.h>
#include <uf_curve.h>
#include <uf_modl.h>
#include <stdio.h>
#define UF_CALL(X) (report( __FILE__, __LINE__, #X, (X)))
static int report( char *file, int line, char *call, int irc)
{
  if (irc)
  {
     char    messg[133];
     printf("%s, line %d:  %s\n", file, line, call);
     (UF_get_fail_message(irc, messg)) ?
       printf("    returned a %d\n", irc) :
       printf("    returned error %d:  %s\n", irc, messg);
  }
  return(irc);
}
static void do_ugopen_api(void)
{
  int obj_count;
  char*body_limit[2]={"outer_diameter=4.0","inner_diameter=1.0"};
  tag_t  generators[2], line1, line2, *objects;
  UF_MODL_SWEEP_TRIM_object_p_t trim_data = NULL;
  UF_CURVE_line_t sline1, sline2;
  UF_FEATURE_SIGN   mode_sign = UF_NULLSIGN;

  UF_initialize();
/* line#1 */
  sline1.start_point[0] = 0.0;
  sline1.start_point[1] = 0.0;
  sline1.start_point[2] = 0.0;
  sline1.end_point[0] = 0.0;
  sline1.end_point[1] = 1.0;
  sline1.end_point[2] = 0.0;
  UF_CALL(UF_CURVE_create_line(&sline1,&line1));
/* line#2 */
  sline2.start_point[0] = 0.0;
  sline2.start_point[1] = 1.0;
  sline2.start_point[2] = 0.0;
  sline2.end_point[0] = 2.5;
  sline2.end_point[1] = 3.5;
  sline2.end_point[2] = 0.0;
  UF_CURVE_create_line(&sline2,&line2);

  generators[0] = line1;
  generators[1] = line2;

  UF_CALL(UF_MODL_create_trimmed_tube(generators, 2, trim_data,
body_limit,
                              mode_sign, &objects, &obj_count));
}
/*ARGSUSED*/
void ufusr(char *param, int *retcode, int param_len)
{
  if (!UF_CALL(UF_initialize()))
  {
    do_ugopen_api();
    UF_CALL(UF_terminate());
  }
}
int ufusr_ask_unload(void)
{
  return (UF_UNLOAD_IMMEDIATELY);
}