|
mom Variable |
Class |
Description |
Possible Values |
Data Type |
Default |
|
mom_kin_flush_time |
Wire EDM |
Time to be added to machine time for flushing the tank. |
|
Numeric Value |
|
|
mom_lead_in_cutcom_angle |
Wire EDM |
The angle specified for the cutcom move in the Wire EDM operation. Zero would define a tangent transition. A value of 90 is needed for Agie machine tools. |
0-360 |
Numeric Value |
0 |
|
mom_lead_in_cutcom_distance |
Wire EDM |
The length of the cutcom move in the Wire EDM operation. |
Any number greater than or equal to zero. |
Numeric Value |
0 |
|
mom_lead_in_method |
Wire EDM |
Defines the lead in type in a Wire EDM operation. The types are direct 0, angular 1 or circular 2. |
0,1,2 |
Integer |
|
|
mom_sys_agie_cutcom_code |
Wire EDM |
Used to define the cutcom code for the next block of cutcom for Agie machine tools. |
40, 42, 43, 44 |
Integer |
|
|
mom_sys_cut_wire |
Wire EDM |
Defines the M code used to cut the wire. This M code is to output with the MOM_cut_wire event. |
|
Integer |
20 |
|
mom_sys_flushing_off |
Wire EDM |
Defines the M code used to turn off flushing. |
|
Integer |
80 |
|
mom_sys_flushing_on |
Wire EDM |
Defines the M code used to turn on flushing. |
|
Integer |
81 |
|
mom_sys_power_off |
Wire EDM |
Defines the M code used to turn on the power. |
|
Integer |
84 |
|
mom_sys_power_on |
Wire EDM |
Defines the M code used to off the power. |
|
Integer |
85 |
|
mom_sys_thread_wire |
Wire EDM |
Defines the M code used to thread the wire. This M code is used to output with the MOM_thread_wire event. |
|
Integer |
21 |
|
mom_sys_wire_off |
Wire EDM |
Defines the M code used to turn off wire mode. |
|
Integer |
83 |
|
mom_sys |
Wire EDM |
Defines the M code used to turn on wire mode. |
|
Integer |
84 |
|
mom_wire_angle |
Wire EDM |
The wire angle programmed with the Wire Angles UDE to define the tilt of the wire. |
|
Numeric Value |
|
|
mom_wire_angle |
Wire EDM |
Defines the constant tilt parameter for Agie controls. |
|
Numeric Value |
|
|
mom_wire_angle_text |
Wire EDM |
The appended text programmed with the Wire Angles UDE. |
|
String |
|
|
mom_wire_cutcom_adjust_register |
Wire EDM |
The adjust register value programmed with the Cutter Compensation UDE. |
|
Integer |
|
|
mom_wire_cutcom_mode |
Wire EDM |
If cutcom is ON, defines whether is it is LEFT or RIGHT. |
LEFT or RIGHT |
String |
|
|
mom_wire_cutcom_status |
Wire EDM |
Defines whether cutcom is ON or OFF. If the status is ON, mom_wire_cutcom_mode defines whether it is RIGHT or LEFT. |
ON or OFF |
String |
|
|
mom_wire_cutcom_text |
Wire EDM |
The appended text programmed with the Cutter Compensation UDE. |
|
String |
|
|
mom_wire_feed_rate |
Wire EDM |
The value programmed with the Feed Rate UDE. |
|
Numeric Value |
|
|
mom_wire_feed_rate_text |
Wire EDM |
The appended text programmed with the Feed Rate UDE. |
|
String |
|
|
mom_wire_guides_lower_plane |
Wire EDM |
The value of the lower wire guide as specified in the Wire EDM operation. The distance is measured along the Z axis of the MCS. |
|
Numeric Value |
0 |
|
mom_wire_guides_text |
Wire EDM |
The appended text programmed with the Wire Guides UDE. |
|
String |
|
|
mom_wire_guides_upper_plane |
Wire EDM |
The value of the upper wire guide as specified in the Wire EDM operation. The distance is measured along the Z axis of the MCS. |
|
Numeric Value |
1 |
|
mom_wire_height |
Wire EDM |
The distance as measured from the lower wire guide to the upper wire guide. |
|
Numeric Value |
1 |
|
mom_wire_slope |
Wire EDM |
The slope value programmed with the Wire Angles UDE. |
|
Numeric Value |
|
|
|
|
|
|
|
|