MOM Cycle Events

Event	Class	Description	mom Variables
MOM_bore	Cycle Events	This event occurs when the bore cycle is activated and establishes the parameters for the event MOM_bore_move.	All the mom variables generated with the MOM_drill event.
MOM_bore_back	Cycle Events	This event occurs when the bore back cycle is activated and establishes the parameters for the event MOM_bore_back_move.	mom_cycle_orient, plus all the mom variables generated in the MOM_drill event.
MOM_bore_drag	Cycle Events	This event occurs when the bore drag cycle is activated and establishes the parameters for the event MOM_bore_drag_move.	All the mom variables generated with the MOM_drill event.
MOM_bore_dwell	Cycle Events	This event occurs when the bore dwell cycle is activated and establishes the parameters for the event MOM_bore_dwell_move.	All the mom variables generated with the MOM_drill event.
MOM_bore_manual	Cycle Events	This event occurs when the bore manual cycle is activated and establishes the parameters for the event MOM_bore_manual_move.	All the mom variables generated with the MOM_drill event.
MOM_bore_manual_dwell	Cycle Events	This event occurs when the bore manual cycle is activated and establishes the parameters for the event MOM_bore_manual_move.	All the mom variables generated with the MOM_drill event.
MOM_bore_no_drag	Cycle Events	This event occurs when the bore no drag cycle is activated and establishes the parameters for the event MOM_bore_no_drag_move.	mom_cycle_orient, plus all the mom variables generated in the MOM_drill event.
MOM_drill	Cycle Events	This event occurs when the drill cycle is activated and establishes the parameters for the event MOM_drill_move.	mom_cycle_status, mom_cycle_feed-rate, mom_cycle_feed_rate_per_rev, mom_cycle_delay_mode, mom_cycle_feed_rate_mode, mom_cycle_retract_mode, mom_cycle_retract_to, mom_cycle_feed_to, mom_cycle_rapid_to, mom_cycle_clearance_plane, mom_cycle_option
MOM_drill_break_chip	Cycle Events	This event occurs when the drill break chip cycle is activated and establishes the parameters for the event MOM_drill_break_chip_move.	mom_cycle_step1, mom_cycle_step2, mom_cycle_step3 plus all the mom variables generated in the MOM_drill event.
MOM_drill_counter_sink	Cycle Events	This event occurs when the drill countersink cycle is activated and establishes the parameters for the event MOM_drill_counter_sink_move.	mom_cycle_counter_sink_dia, mom_cycle_hole_dia, mom_cycle_tool_angle, plus all the mom variables generated in the MOM_drill event.
MOM_drill_csink_dwell	Cycle Events	This event occurs when the drill countersink dwell cycle is activated and establishes the parameters for the event MOM_drill_csink_dwell_move.	mom_cycle_counter_sink_dia, mom_cycle_hole_dia, mom_cycle_tool_angle, plus all the mom variables generated in the MOM_drill event.
MOM_drill_deep	Cycle Events	This event occurs when the drill deep cycle is activated and establishes the parameters for the event MOM_drill_deep_move.	mom_cycle_step1, mom_cycle_step2, mom_cycle_step3, plus all the mom variables generated in the MOM_drill event.
MOM_drill_dwell	Cycle Events	This event occurs when the drill dwell cycle is activated and establishes the parameters for the event MOM_drill_dwell_move.	All the mom variables generated with the MOM_drill event.
MOM_drill_text	Cycle Events	This event occurs when the drill text cycle is activated and establishes the parameters for the event MOM_drill_text_move.	mom_cycle_text, plus all the mom variables generated in the MOM_drill event.
MOM_tap	Cycle Events	This event occurs when the tap cycle is activated and establishes the parameters for the event MOM_tap_move.	All the mom variables generated with the MOM_drill event.
MOM_bore_move	Cycle Events	This event occurs at the motion when the bore cycle is active and uses the parameters established by the bore cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_bore_back_move	Cycle Events	This event occurs at the motion when the bore back cycle is active and uses the parameters established by the bore back cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_bore_drag_move	Cycle Events	This event occurs at the motion when the bore drag cycle is active and uses the parameters established by the bore drag cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_bore_dwell_move	Cycle Events	This event occurs at the motion when the bore dwell cycle is active and uses the parameters established by the bore dwell cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_bore_manual_move	Cycle Events	This event occurs at the motion when the bore manual cycle is active and uses the parameters established by the bore manual cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_bore_manual_dwell_move	Cycle Events	This event occurs at the motion when the bore manual dwell cycle is active and uses the parameters established by the bore manual dwell cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_bore_no_drag_move	Cycle Events	This event occurs at the motion when the bore no drag cycle is active and uses the parameters established by the bore no drag cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_drill_move	Cycle Events	This event occurs at the motion when the drill cycle is active and uses the parameters established by the drill cycle for the output.	mom_cycle_clearance_plane, mom_cycle_delay_revs, mom_cycle_rapid_to_pos, mom_cycle_retract_to_pos, mom_cycle_feed_to_pos, plus all the mom variables generated with MOM_linear_move event.
MOM_drill_break_chip_move	Cycle Events	This event occurs at the motion when the drill break chip cycle is active and uses the parameters established by the drill break chip cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_drill_counter_sink_move	Cycle Events	This event occurs at the motion when the drill countersink cycle is active and uses the parameters established by the drill countersink cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_drill_csink_dwell_move	Cycle Events	This event occurs at the motion when the drill countersink dwell cycle is active and uses the parameters established by the drill countersink dwell cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_drill_deep_move	Cycle Events	This event occurs at the motion when the drill deep cycle is active and uses the parameters established by the drill deep cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_drill_dwell_move	Cycle Events	This event occurs at the motion when the drill dwell cycle is active and uses the parameters established by the drill dwell cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_drill_text_move	Cycle Events	This event occurs at the motion when the drill text cycle is active and uses the parameters established by the drill text cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_tap_move	Cycle Events	This event occurs at the motion when the tap cycle is active and uses the parameters established by the tap cycle for the output.	All the mom variables generated with MOM_linear_move event and the MOM_drill_move_event.
MOM_cycle_off	Cycle Events	This event occurs when a previous cycle is deactivated.	mom_cycle_status
MOM_cycle_plane_change	Cycle Events	This event is triggered when the current work surface is at a higher level than the previous while in cycle motion.	mom_cycle_clearance_pos