Debug Output for TASK: /users/jensen/ug/fanuc.prt
Created By: jensen
Creation Date: Tue Jul 21 12:34:00 1998
===============================================
--------------------------------------------------
Event : MOM_start_of_program
Var: mom_definition_file_name =
/users/jensen/post_test/mill3ax.def
Var: mom_output_file_directory =
Var: mom_output_file_basename =
/users/jensen/ug/fanuc
Var: mom_output_file_suffix = ptp
Var: mom_source_directory =
/users/jensen/post_test
Var: mom_event_handler_file_name =
/users/jensen/post_test/mill3ax.tcl
Var: mom_machine_name = mill3ax
Var: mom_arc_center[0] = 0.00000000000000000
Var: mom_arc_center[1] = 0.00000000000000000
Var: mom_arc_center[2] = 0.00000000000000000
Var: mom_arc_axis[0] = 0.00000000000000000
Var: mom_arc_axis[1] = 0.00000000000000000
Var: mom_arc_axis[2] = 1.00000000000000000
Var: mom_arc_mode = CIRCULAR
Var: mom_arc_radius = 0.00000000000000000
Var: mom_arc_tolerance = 0.00100000000000000
Var: mom_auxfun = 0
Var: mom_auxfun_text =
Var: mom_clamp_status = OFF
Var: mom_clamp_axis =
Var: mom_clamp_text =
Var: mom_coolant_mode =
Var: mom_coolant_status = OFF
Var: mom_coolant_text =
Var: mom_cutcom_mode = LEFT
Var: mom_cutcom_plane = XY
Var: mom_cutcom_status = OFF
Var: mom_cutcom_text =
Var: mom_cut_wire_text =
Var: mom_cycle_cam = 0
Var: mom_cycle_counter_sink_dia =
0.00000000000000000
Var: mom_cycle_feed_rate = 0.00000000000000000
Var: mom_cycle_feed_rate_mode =
Var: mom_cycle_feed_to = 0.00000000000000000
Var: mom_cycle_hole_dia = 0.00000000000000000
Var: mom_cycle_option =
Var: mom_cycle_rapid_to = 0.10000000000000001
Var: mom_cycle_retract_mode =
Var: mom_cycle_retract_to = 0.10000000000000001
Var: mom_cycle_status = OFF
Var: mom_cycle_step1 = 0.00000000000000000
Var: mom_cycle_step2 = 0.00000000000000000
Var: mom_cycle_step3 = 0.00000000000000000
Var: mom_cycle_tool_angle = 0.00000000000000000
Var: mom_delay_mode = SECONDS
Var: mom_delay_revs = 0
Var: mom_delay_text =
Var: mom_delay_value = 0
Var: mom_event_number = 0
Var: mom_feed_rate = 10.00000000000000000
Var: mom_feed_rate_mode = IPM
Var: mom_feed_set_mode = OFF
Var: mom_feed_rate_output_mode = IPM
Var: mom_flush_guides =
Var: mom_flush_pressure = REGISTER
Var: mom_flush_register = 0
Var: mom_flush_tank = OUT
Var: mom_flush_tank_text =
Var: mom_flush_text =
Var: mom_flush_status = OFF
Var: mom_head_type =
Var: mom_head_text =
Var: mom_last_z_pos = 0.00000000000000000
Var: mom_lathe_spindle_axis = MCSX
Var: mom_lathe_thread_advance_type = 0
Var: mom_lathe_thread_increment =
0.00000000000000000
Var: mom_lathe_thread_type = 0
Var: mom_lathe_thread_value = 0.00000000000000000
Var: mom_length_comp_register = 0
Var: mom_length_comp_register_text =
Var: mom_load_tool_number = 0
Var: mom_machine_mode = MILL
Var: mom_modes_text =
Var: mom_motion_type = UNDEFINED
Var: mom_operation_type = UNDEFINED
Var: mom_operator_message_status = OFF
Var: mom_operator_message =
Var: mom_opskip_text =
Var: mom_opskip_status = OFF
Var: mom_opstop_text =
Var: mom_output_mode = ABSOLUTE
Var: mom_origin[0] = 0.00000000000000000
Var: mom_origin[1] = 0.00000000000000000
Var: mom_origin[2] = 0.00000000000000000
Var: mom_origin_text =
Var: mom_parallel_to_axis = ZAXIS
Var: mom_path_name =
Var: mom_mcs_goto[0] = 0.00000000000000000
Var: mom_mcs_goto[1] = 0.00000000000000000
Var: mom_mcs_goto[2] = 0.00000000000000000
Var: mom_pos[0] = 0.00000000000000000
Var: mom_pos[1] = 0.00000000000000000
Var: mom_pos[2] = 0.00000000000000000
Var: mom_power_text =
Var: mom_power_value = 0.00000000000000000
Var: mom_pprint =
Var: mom_prefun = 1
Var: mom_prefun_text =
Var: mom_prev_mcs_goto[0] = 0.00000000000000000
Var: mom_prev_mcs_goto[1] = 0.00000000000000000
Var: mom_prev_mcs_goto[2] = 0.00000000000000000
Var: mom_prev_pos[0] = 0.00000000000000000
Var: mom_prev_pos[1] = 0.00000000000000000
Var: mom_prev_pos[2] = 0.00000000000000000
Var: mom_prev_tool_axis[0] = 0.00000000000000000
Var: mom_prev_tool_axis[1] = 0.00000000000000000
Var: mom_prev_tool_axis[2] = 1.00000000000000000
Var: mom_record_text =
Var: mom_record_fields[0] =
Var: mom_field_count = 0
Var: mom_resolution = 0.00010000000000000
Var: mom_rotate_axis_type = TABLE
Var: mom_rotation_direction = CLW
Var: mom_rotation_angle = 0.00000000000000000
Var: mom_rotation_mode = ABSOLUTE
Var: mom_rotation_reference_mode = OFF
Var: mom_rotation_text =
Var: mom_sequence_mode = ON
Var: mom_sequence_number = 10
Var: mom_sequence_increment = 10
Var: mom_sequence_frequency = 1
Var: mom_sequence_text =
Var: mom_spindle_status = OFF
Var: mom_spindle_direction = CLW
Var: mom_spindle_maximum_rpm =
1000.00000000000000000
Var: mom_spindle_mode = RPM
Var: mom_spindle_range =
Var: mom_spindle_text =
Var: mom_spindle_speed = 0.00000000000000000
Var: mom_stop_text =
Var: mom_thread_wire_text =
Var: mom_tool_adjust_register = 0
Var: mom_tool_angle = 0.00000000000000000
Var: mom_tool_axis[0] = 0.00000000000000000
Var: mom_tool_axis[1] = 0.00000000000000000
Var: mom_tool_axis[2] = 1.00000000000000000
Var: mom_tool_change_type = AUTO
Var: mom_tool_head =
Var: mom_tool_radius = 0.00000000000000000
Var: mom_tool_x_offset = 0.00000000000000000
Var: mom_tool_y_offset = 0.00000000000000000
Var: mom_tool_z_offset = 0.00000000000000000
Var: mom_tool_name =
Var: mom_tool_number = 0
Var: mom_tool_preselect_number = 0
Var: mom_tool_preselect_text =
Var: mom_tool_text =
Var: mom_user_defined_text =
Var: mom_wire_cutcom_adjust_register = 0
Var: mom_wire_angle = 0.00000000000000000
Var: mom_wire_angle_text =
Var: mom_wire_cutcom_mode = LEFT
Var: mom_wire_cutcom_status = OFF
Var: mom_wire_cutcom_text =
Var: mom_wire_feed_rate = 10.00000000000000000
Var: mom_wire_feed_rate_text =
Var: mom_wire_guides_text =
Var: mom_wire_slope = 0.00000000000000000
Var: mom_next_tool_name =
Var: mom_next_tool_number = 0
Var: mom_next_tool_name = T2
Var: mom_next_tool_number = 2
Var: mom_part_name = /users/jensen/ug/fanuc.prt
Var: mom_part_unit = IN
Var: mom_feed_rate_mode = IPM
Var: mom_feed_rate_output_mode = IPM
--------------------------------------------------
Event : MOM_start_of_path
Var: mom_seqnum = 10.00000000000000000
Address: N = 10
Var: mom_seqnum = 20.00000000000000000
Var: mom_o_buffer = N10 (######## TASK :
/users/jensen/ug/fanuc.prt ############)
Address: ENUM = 2
Address: ABSX = 0.0000
Address: ABSY = 0.0000
Address: ABSZ = 0.0000
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 0
Address: N = 20
Var: mom_seqnum = 30.00000000000000000
Var: mom_o_buffer = N20 (# Created By :
jensen)
Address: ENUM = 3
Address: ABSX = 0.0000
Address: ABSY = 0.0000
Address: ABSZ = 0.0000
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 0
Address: N = 30
Var: mom_seqnum = 40.00000000000000000
Var: mom_o_buffer = N30 (# Creation Date: Tue
Jul 21 12:34:00 1998)
Address: ENUM = 4
Address: ABSX = 0.0000
Address: ABSY = 0.0000
Address: ABSZ = 0.0000
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 0
Address: N = 40
Var: mom_seqnum = 50.00000000000000000
Var: mom_o_buffer = N40
(############################################)
Address: ENUM = 5
Address: ABSX = 0.0000
Address: ABSY = 0.0000
Address: ABSZ = 0.0000
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 0
Var: mom_o_buffer = %
Address: ENUM = 6
Address: ABSX = 0.0000
Address: ABSY = 0.0000
Address: ABSZ = 0.0000
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 0
Address: N = 50
Var: mom_seqnum = 60.00000000000000000
Var: mom_o_buffer = N50 G70 G90
Address: ENUM = 7
Address: ABSX = 0.0000
Address: ABSY = 0.0000
Address: ABSZ = 0.0000
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 0
Var: mom_next_tool_name = T2
Var: mom_next_tool_number = 2
Var: mom_next_tool_status = FIRST
Var: mom_path_name = P14
Var: mom_tool_name = T2
Var: mom_operation_type = FIX_CONTOUR
Var: mom_tool_parameter_count = 5
Var: mom_tool_corner1_radius = 0.25000000000000000
Var: mom_tool_gage_length = 5.00000000000000000
Var: mom_tool_flute_length = 4.00000000000000000
Var: mom_tool_taper_angle = 0.00000000000000000
Var: mom_tool_tip_angle = 0.00000000000000000
Var: mom_tool_adjust_register = 2
Var: mom_cutcom_adjust_register = 0
Var: mom_tool_number = 2
Var: mom_tool_count = 1
Var: mom_tool_type = MILL
Var: mom_tool_diameter = 0.50000000000000000
Var: mom_paint_arrow = FALSE
Var: mom_paint_path_type = SOLID
Var: mom_paint_silhouette_percentage = 100
Var: mom_paint_feed = FALSE
Var: mom_paint_line_number = FALSE
Var: mom_paint_speed = TRUE
Var: mom_paint_speed_value = 9
Var: mom_paint_tool = 3D
Var: mom_tool_display_type = THREE_DIMENSIONAL
Var: mom_tool_display_frequency = 1
Var: mom_paint_pattern = FALSE
Var: mom_pattern_display_frequency = 0
--------------------------------------------------
Event : MOM_first_tool
Address: N = 60
Var: mom_seqnum = 70.00000000000000000
Var: mom_o_buffer = N60
(-------------------------------------------------
---)
Address: ENUM = 9
Address: ABSX = 0.0000
Address: ABSY = 0.0000
Address: ABSZ = 0.0000
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 0
Address: N = 70
Var: mom_seqnum = 80.00000000000000000
Var: mom_o_buffer = N70 (Start path: P14 with
tool: T2)
Address: ENUM = 10
Address: ABSX = 0.0000
Address: ABSY = 0.0000
Address: ABSZ = 0.0000
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 0
Address: N = 80
Var: mom_seqnum = 90.00000000000000000
Var: mom_o_buffer = N80
(-------------------------------------------------
---)
Address: ENUM = 11
Address: ABSX = 0.0000
Address: ABSY = 0.0000
Address: ABSZ = 0.0000
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 0
--------------------------------------------------
Event : MOM_msys
Var: mom_event_number = 1
Var: mom_event_number = 2
Var: mom_event_number = 3
Var: mom_msys_origin[0] = 0.00000000000000000
Var: mom_msys_origin[1] = 0.00000000000000000
Var: mom_msys_origin[2] = 0.00000000000000000
Var: mom_msys_matrix[0] = 1.00000000000000000
Var: mom_msys_matrix[1] = 0.00000000000000000
Var: mom_msys_matrix[2] = 0.00000000000000000
Var: mom_msys_matrix[3] = 0.00000000000000000
Var: mom_msys_matrix[4] = 1.00000000000000000
Var: mom_msys_matrix[5] = 0.00000000000000000
Var: mom_msys_matrix[6] = 0.00000000000000000
Var: mom_msys_matrix[7] = 0.00000000000000000
Var: mom_msys_matrix[8] = 1.00000000000000000
--------------------------------------------------
Event : MOM_load_tool
Var: mom_warning_info = MISSING EVENT HANDLER:
Event Name: MOM_msys
Var: mom_event_number = 4
Var: mom_command_status = ACTIVE
Var: mom_tool_offset[0] = 0.00000000000000000
Var: mom_tool_offset[1] = 0.00000000000000000
Var: mom_tool_offset[2] = 0.20000000298023224
Var: mom_tool_x_offset = 0.00000000000000000
Var: mom_tool_y_offset = 0.00000000000000000
Var: mom_tool_z_offset = 0.20000000298023224
Var: mom_load_tool_number = 2
Var: mom_tool_adjust_register = 2
Var: mom_tool_change_type = AUTO
Var: mom_tool_text =
Var: mom_event_time = 0.20000000000000001
Var: mom_machine_time = 0.20000000000000001
--------------------------------------------------
Event : MOM_spindle_rpm
Var: mom_event_number = 5
Var: mom_command_status = ACTIVE
Var: mom_spindle_speed = 200.00000000000000000
Var: mom_spindle_rpm = 200.00000000000000000
Var: mom_spindle_status = ON
Var: mom_spindle_mode = RPM
Var: mom_spindle_direction = CLW
Var: mom_spindle_text =
--------------------------------------------------
Event : MOM_initial_move
Var: mom_event_number = 6
Var: mom_mcs_coord_mode = GOTO
Var: mom_mcs_goto[0] = -2.20058880973034790
Var: mom_mcs_goto[1] = -0.35969823898124309
Var: mom_mcs_goto[2] = 0.06250000000000000
Var: mom_tool_axis[0] = 0.00000000000000000
Var: mom_tool_axis[1] = 0.00000000000000000
Var: mom_tool_axis[2] = 1.00000000000000000
Var: mom_motion_type = CUT
Var: mom_feed_rate_mode = IPM
Var: mom_feed_rate_output_mode = IPM
Var: mom_feed_rate = 10.00000000000000000
Var: mom_feed_rate_per_rev = 0.05000000000000000
Var: mom_feed_rate_number = 0.00000000000000000
Var: mom_motion_distance = 0.00000000000000000
Var: mom_paint_color = 3
Var: mom_out_angle_pos[0] = 0.00000000000000000
Var: mom_out_angle_pos[1] = 0.00000000000000000
Var: mom_pos[0] = -2.20058899999999990
Var: mom_pos[1] = -0.35969800000000002
Var: mom_pos[2] = 0.26250000000000001
Var: mom_pos[3] = 0.00000000000000000
Var: mom_pos[4] = 0.00000000000000000
Var: mom_alt_pos[0] = -2.20058899999999990
Var: mom_alt_pos[1] = -0.35969800000000002
Var: mom_alt_pos[2] = 0.26250000000000001
Var: mom_alt_pos[3] = 0.00000000000000000
Var: mom_alt_pos[4] = 0.00000000000000000
Var: mom_feed_rate_number = 4.45396483592425870
Var: mom_motion_distance = 2.24519060396328030
Var: mom_event_time = 0.22451906039632802
Var: mom_machine_time = 0.42451906039632803
Var: mom_tool_use[0,0] = 2.00000000000000000
Var: mom_tool_use[0,1] = 0.22451906039632802
Var: mom_cutting_time = 0.22451906039632802
--------------------------------------------------
Event : MOM_linear_move
Address: G = 28
Address: G = 91
Address: Z = 0.0000
Address: N = 90
Var: mom_seqnum = 100.00000000000000000
Var: mom_o_buffer = N90 G28 G91 Z0.0000
Address: ENUM = 18
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 200
Address: T = 2
Address: M = 6
Address: N = 100
Var: mom_seqnum = 110.00000000000000000
Var: mom_o_buffer = N100 T2 M6
Address: ENUM = 19
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 200
Address: T = 2
Address: N = 110
Var: mom_seqnum = 120.00000000000000000
Var: mom_o_buffer = N110 T2
Address: ENUM = 20
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 200
Address: motion_g = 0
Address: G = 90
Address: X = -2.2006
Address: Y = -0.3597
Address: N = 120
Var: mom_seqnum = 130.00000000000000000
Var: mom_o_buffer = N120 G0 G90 X-2.2006
Y-0.3597
Address: ENUM = 21
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 200
Address: S = 200
Address: spindle_m = 3
Address: N = 130
Var: mom_seqnum = 140.00000000000000000
Var: mom_o_buffer = N130 S200 M3
Address: ENUM = 22
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 200
Address: Z = 0.2625
Address: H = 2
Address: coolant_m = 9
Address: N = 140
Var: mom_seqnum = 150.00000000000000000
Var: mom_o_buffer = N140 Z0.2625 H2 M9
Address: ENUM = 23
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 200
Var: mom_last_z_pos = 0.26250000000000001
Var: mom_prev_mcs_goto[0] = -2.20058880973034790
Var: mom_prev_mcs_goto[1] = -0.35969823898124309
Var: mom_prev_mcs_goto[2] = 0.06250000000000000
Var: mom_prev_tool_axis[0] = 0.00000000000000000
Var: mom_prev_tool_axis[1] = 0.00000000000000000
Var: mom_prev_tool_axis[2] = 1.00000000000000000
Var: mom_prev_pos[0] = -2.20058899999999990
Var: mom_prev_pos[1] = -0.35969800000000002
Var: mom_prev_pos[2] = 0.26250000000000001
Var: mom_prev_pos[3] = 0.00000000000000000
Var: mom_prev_pos[4] = 0.00000000000000000
Var: mom_prev_alt_pos[0] = -2.20058899999999990
Var: mom_prev_alt_pos[1] = -0.35969800000000002
Var: mom_prev_alt_pos[2] = 0.26250000000000001
Var: mom_prev_alt_pos[3] = 0.00000000000000000
Var: mom_prev_alt_pos[4] = 0.00000000000000000
Var: mom_event_number = 7
Var: mom_mcs_coord_mode = GOTO
Var: mom_mcs_goto[0] = -2.10052677064514940
Var: mom_mcs_goto[1] = 1.75213939904103770
Var: mom_mcs_goto[2] = 0.06250000000000000
Var: mom_tool_axis[0] = 0.00000000000000000
Var: mom_tool_axis[1] = 0.00000000000000000
Var: mom_tool_axis[2] = 1.00000000000000000
Var: mom_motion_type = FIRSTCUT
Var: mom_feed_rate_mode = IPM
Var: mom_feed_rate_output_mode = IPM
Var: mom_feed_rate = 10.00000000000000000
Var: mom_feed_rate_per_rev = 0.05000000000000000
Var: mom_feed_rate_number = 0.00000000000000000
Var: mom_motion_distance = 0.00000000000000000
Var: mom_paint_color = 3
Var: mom_out_angle_pos[0] = 0.00000000000000000
Var: mom_out_angle_pos[1] = 0.00000000000000000
Var: mom_pos[0] = -2.10052700000000000
Var: mom_pos[1] = 1.75213899999999990
Var: mom_pos[2] = 0.26250000000000001
Var: mom_pos[3] = 0.00000000000000000
Var: mom_pos[4] = 0.00000000000000000
Var: mom_alt_pos[0] = -2.10052700000000000
Var: mom_alt_pos[1] = 1.75213899999999990
Var: mom_alt_pos[2] = 0.26250000000000001
Var: mom_alt_pos[3] = 0.00000000000000000
Var: mom_alt_pos[4] = 0.00000000000000000
Var: mom_feed_rate_number = 4.72990757964725720
Var: mom_motion_distance = 2.11420621473237570
Var: mom_event_time = 0.21142062147323756
Var: mom_machine_time = 0.63593968186956562
Var: mom_tool_use[0,0] = 2.00000000000000000
Var: mom_tool_use[0,1] = 0.43593968186956555
Var: mom_cutting_time = 0.43593968186956555
--------------------------------------------------
Event : MOM_circular_move
Address: X = -1.4640
Address: Y = 1.0086
Address: N = 260
Var: mom_seqnum = 270.00000000000000000
Var: mom_o_buffer = N260 X-1.4640 Y1.0086
Address: ENUM = 59
Address: ABSX = -1.4640
Address: ABSY = 1.0086
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 10.0000
Address: RPM = 200
Var: mom_last_z_pos = 0.26250000000000001
Var: mom_prev_mcs_goto[0] = -1.46400212157100730
Var: mom_prev_mcs_goto[1] = 1.00858145719732710
Var: mom_prev_mcs_goto[2] = 0.06250000000000000
Var: mom_prev_tool_axis[0] = 0.00000000000000000
Var: mom_prev_tool_axis[1] = 0.00000000000000000
Var: mom_prev_tool_axis[2] = 1.00000000000000000
Var: mom_prev_pos[0] = -1.46400200000000000
Var: mom_prev_pos[1] = 1.00858099999999990
Var: mom_prev_pos[2] = 0.26250000000000001
Var: mom_prev_pos[3] = 0.00000000000000000
Var: mom_prev_pos[4] = 0.00000000000000000
Var: mom_prev_alt_pos[0] = -1.46400200000000000
Var: mom_prev_alt_pos[1] = 1.00858099999999990
Var: mom_prev_alt_pos[2] = 0.26250000000000001
Var: mom_prev_alt_pos[3] = 0.00000000000000000
Var: mom_prev_alt_pos[4] = 0.00000000000000000
Var: mom_event_number = 19
Var: mom_mcs_coord_mode = GOTO
Var: mom_motion_type = FIRSTCUT
Var: mom_feed_rate_mode = IPM
Var: mom_feed_rate_output_mode = IPM
Var: mom_feed_rate = 4.51606772198642050
Var: mom_feed_rate_per_rev = 0.02258033860993210
Var: mom_feed_rate_number = 0.00000000000000000
Var: mom_motion_distance = 0.00000000000000000
Var: mom_paint_color = 3
Var: mom_arc_axis[0] = -0.00000000000000000
Var: mom_arc_axis[1] = -0.00000000000000000
Var: mom_arc_axis[2] = -1.00000000000000000
Var: mom_arc_tolerance = 0.00200000000000000
Var: mom_arc_intol_fraction = 0.50000000000000000
Var: mom_arc_tool_diameter = 0.50000000000000000
Var: mom_arc_tool_radius = 0.25000000000000000
Var: mom_arc_center[0] = -1.39682132931580490
Var: mom_arc_center[1] = 1.20318923136330950
Var: mom_arc_center[2] = 0.06250000000000000
Var: mom_arc_direction = CCLW
Var: mom_arc_radius = 0.20587725618405414
Var: mom_pos_arc_center[0] = -1.39682100000000010
Var: mom_pos_arc_center[1] = 1.20318900000000010
Var: mom_pos_arc_center[2] = 0.26250000000000001
Var: mom_pos_arc_center[3] = 0.00000000000000000
Var: mom_pos_arc_center[4] = 0.00000000000000000
Var: mom_invert_arc_center[0] =
-1.39682100000000010
Var: mom_invert_arc_center[1] =
1.20318900000000010
Var: mom_invert_arc_center[2] =
0.26250000000000001
Var: mom_invert_arc_center[3] =
0.00000000000000000
Var: mom_invert_arc_center[4] =
0.00000000000000000
Var: mom_pos_arc_axis[0] = 0.00000000000000000
Var: mom_pos_arc_axis[1] = 0.00000000000000000
Var: mom_pos_arc_axis[2] = -1.00000000000000000
Var: mom_mcs_goto[0] = -1.28343984287309490
Var: mom_mcs_goto[1] = 1.03134603788182110
Var: mom_mcs_goto[2] = 0.06250000000000000
Var: mom_tool_axis[0] = 0.00000000000000000
Var: mom_tool_axis[1] = 0.00000000000000000
Var: mom_tool_axis[2] = 1.00000000000000000
Var: mom_out_angle_pos[0] = 0.00000000000000000
Var: mom_out_angle_pos[1] = 0.00000000000000000
Var: mom_pos[0] = -1.28343999999999990
Var: mom_pos[1] = 1.03134600000000010
Var: mom_pos[2] = 0.26250000000000001
Var: mom_pos[3] = 0.00000000000000000
Var: mom_pos[4] = 0.00000000000000000
Var: mom_alt_pos[0] = -1.28343999999999990
Var: mom_alt_pos[1] = 1.03134600000000010
Var: mom_alt_pos[2] = 0.26250000000000001
Var: mom_alt_pos[3] = 0.00000000000000000
Var: mom_alt_pos[4] = 0.00000000000000000
--------------------------------------------------
Event : MOM_coolant_off
Address: motion_g = 3
Address: X = -2.2006
Address: I = -1.2500
Address: J = -1.0000
Address: F = 8.6492
Address: N = 570
Var: mom_seqnum = 580.00000000000000000
Var: mom_o_buffer = N570 G3 X-2.2006 I-1.2500
J-1.0000 F 8.6492
Address: ENUM = 152
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 8.6492
Address: RPM = 200
Var: mom_last_z_pos = 0.26250000000000001
Var: mom_prev_mcs_goto[0] = -2.20058880973034790
Var: mom_prev_mcs_goto[1] = -0.35969823898124309
Var: mom_prev_mcs_goto[2] = 0.06250000000000000
Var: mom_prev_tool_axis[0] = 0.00000000000000000
Var: mom_prev_tool_axis[1] = 0.00000000000000000
Var: mom_prev_tool_axis[2] = 1.00000000000000000
Var: mom_prev_pos[0] = -2.20058899999999990
Var: mom_prev_pos[1] = -0.35969800000000002
Var: mom_prev_pos[2] = 0.26250000000000001
Var: mom_prev_pos[3] = 0.00000000000000000
Var: mom_prev_pos[4] = 0.00000000000000000
Var: mom_prev_alt_pos[0] = -2.20058899999999990
Var: mom_prev_alt_pos[1] = -0.35969800000000002
Var: mom_prev_alt_pos[2] = 0.26250000000000001
Var: mom_prev_alt_pos[3] = 0.00000000000000000
Var: mom_prev_alt_pos[4] = 0.00000000000000000
Var: mom_feed_rate_number = 5.40312423743285030
Var: mom_motion_distance = 2.86877697551549190
Var: mom_event_time = 0.33168046678011637
Var: mom_machine_time = 1.53666328830055150
Var: mom_tool_use[0,0] = 2.00000000000000000
Var: mom_tool_use[0,1] = 1.33666328830055160
Var: mom_cutting_time = 1.33666328830055160
Var: mom_last_z_pos = 0.26250000000000001
Var: mom_prev_mcs_goto[0] = -2.20058880973034790
Var: mom_prev_mcs_goto[1] = -0.35969823898124309
Var: mom_prev_mcs_goto[2] = 0.06250000000000000
Var: mom_prev_tool_axis[0] = 0.00000000000000000
Var: mom_prev_tool_axis[1] = 0.00000000000000000
Var: mom_prev_tool_axis[2] = 1.00000000000000000
Var: mom_prev_pos[0] = -2.20058899999999990
Var: mom_prev_pos[1] = -0.35969800000000002
Var: mom_prev_pos[2] = 0.26250000000000001
Var: mom_prev_pos[3] = 0.00000000000000000
Var: mom_prev_pos[4] = 0.00000000000000000
Var: mom_prev_alt_pos[0] = -2.20058899999999990
Var: mom_prev_alt_pos[1] = -0.35969800000000002
Var: mom_prev_alt_pos[2] = 0.26250000000000001
Var: mom_prev_alt_pos[3] = 0.00000000000000000
Var: mom_prev_alt_pos[4] = 0.00000000000000000
Var: mom_event_number = 50
Var: mom_command_status = ACTIVE
Var: mom_coolant_status = OFF
Var: mom_coolant_text =
--------------------------------------------------
Event : MOM_spindle_off
Var: mom_event_number = 51
Var: mom_command_status = ACTIVE
Var: mom_spindle_status = OFF
Var: mom_spindle_text =
--------------------------------------------------
Event : MOM_opstop
Address: spindle_m = 5
Address: N = 580
Var: mom_seqnum = 590.00000000000000000
Var: mom_o_buffer = N580 M5
Address: ENUM = 155
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 8.6492
Address: RPM = 200
Var: mom_event_number = 52
Var: mom_command_status = ACTIVE
Var: mom_opstop_text =
--------------------------------------------------
Event : MOM_stop
Address: M = 1
Address: N = 590
Var: mom_seqnum = 600.00000000000000000
Var: mom_o_buffer = N590 M1
Address: ENUM = 157
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 8.6492
Address: RPM = 200
Var: mom_event_number = 53
Var: mom_command_status = ACTIVE
Var: mom_stop_text =
--------------------------------------------------
Event : MOM_text
Address: M = 0
Address: N = 600
Var: mom_seqnum = 610.00000000000000000
Var: mom_o_buffer = N600 M0
Address: ENUM = 159
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 8.6492
Address: RPM = 200
Var: mom_event_number = 54
Var: mom_command_status = ACTIVE
Var: mom_user_defined_text = END
Var: mom_record_text =
Var: mom_field_count = 1
Var: mom_record_fields[0] = END
--------------------------------------------------
Event : MOM_text
Address: N = 610
Var: mom_seqnum = 620.00000000000000000
Var: mom_o_buffer = N610 END
Address: ENUM = 161
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 8.6492
Address: RPM = 200
Var: mom_event_number = 55
Var: mom_command_status = ACTIVE
Var: mom_user_defined_text = REWIND
Var: mom_record_text =
Var: mom_field_count = 1
Var: mom_record_fields[0] = REWIND
--------------------------------------------------
Event : MOM_text
Address: N = 620
Var: mom_seqnum = 630.00000000000000000
Var: mom_o_buffer = N620 REWIND
Address: ENUM = 163
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 8.6492
Address: RPM = 200
Var: mom_event_number = 56
Var: mom_command_status = ACTIVE
Var: mom_user_defined_text = FINI
Var: mom_record_text =
Var: mom_field_count = 1
Var: mom_record_fields[0] = FINI
--------------------------------------------------
Event : MOM_end_of_path
Address: N = 630
Var: mom_seqnum = 640.00000000000000000
Var: mom_o_buffer = N630 FINI
Address: ENUM = 165
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 8.6492
Address: RPM = 200
Var: mom_event_number = 57
Var: mom_event_number = 58
Var: mom_event_number = 59
Var: mom_event_number = 60
Var: mom_event_number = 61
Var: mom_event_number = 62
--------------------------------------------------
Event : MOM_end_of_program
Address: N = 640
Var: mom_seqnum = 650.00000000000000000
Var: mom_o_buffer = N640 (End Of Path P14)
Address: ENUM = 167
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 8.6492
Address: RPM = 200
Address: M = 2
Address: N = 650
Var: mom_seqnum = 660.00000000000000000
Var: mom_o_buffer = N650 M2
Address: ENUM = 169
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 8.6492
Address: RPM = 200
Address: N = 660
Var: mom_seqnum = 670.00000000000000000
Var: mom_o_buffer = N660 (###### END OF TASK:
/users/jensen/ug/fanuc.prt #########)
Address: ENUM = 170
Address: ABSX = -2.2006
Address: ABSY = -0.3597
Address: ABSZ = 0.2625
Address: AXIS4 = 0.0000
Address: AXIS5 = 0.0000
Address: FEED = 8.6492
Address: RPM = 200